Howdy, I've got a 91 L300 and a shot ball joint. I've done the searches on this site and got some part numbers....unfortunately, I live in williams lake and all the parts suppliers say that those pn don't work ( napa and taylor).....so I ordered a ball joint for a 91 Montero.....not sure if its the same, I've never had it out....could someone post a pic of the proper joint uninstalled so I can compare. The pn of the joint I have is napa 260-1250.
Thanks guys :)
upper ball joint
-
Helidriver
- Posts: 25
- Joined: Sun Apr 22, 2007 11:13 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Location: Peace River AB
-
FalcoColumbarius
- Site Admin
- Posts: 5983
- Joined: Tue Jan 22, 2008 1:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
- Vehicle: Delica; Chamonix GLX ('92 P25W)
- Location: North Van, BC, eh?
Re: upper ball joint
Contact CVI Automotive on (604)-247 0500.
Falco.
Falco.
Sent from my smart pad, using a pen.
Seek Beauty...
Good Ship Miss Lil' Bitchi
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Seek Beauty...
Good Ship Miss Lil' Bitchi...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
-
jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: upper ball joint
L300 and L400 upper/lower balljoint are the same
L300 and L400 upper balljoints are not the same as Montero's (control arm is different)
Montero lower balljoints will fit providing you cap off the grease nipple as it doesn't clear the control arm on L300/L400's
L300 and L400 upper balljoints are not the same as Montero's (control arm is different)
Montero lower balljoints will fit providing you cap off the grease nipple as it doesn't clear the control arm on L300/L400's