Hey I have a 94 2.8l pajero and am going to install a egt gauge but I\m not sure which one to buy, other than I'm going to go with the glow shift gauge but they have one that goes to 1500F and one that goes to 2400F I think that the one that goes to 1500f would be easier to read but I dont know if that is too close to the temperatures these run at. And what would be the "danger zone" when it comes to EGT's?
http://www.glowshiftdirect.com/black-face-gauges.aspx
Thanks Joe
EGT Gauge
-
- Posts: 329
- Joined: Wed Sep 30, 2009 4:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 Pajero
- Location: Prince George BC
- Location: Prince George BC
-
- Posts: 329
- Joined: Wed Sep 30, 2009 4:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 Pajero
- Location: Prince George BC
- Location: Prince George BC
Re: EGT Gauge
I tried searching in the forum for this info but no luck......anyone know where I can look?
- FalcoColumbarius
- Site Admin
- Posts: 5983
- Joined: Tue Jan 22, 2008 1:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
- Vehicle: Delica; Chamonix GLX ('92 P25W)
- Location: North Van, BC, eh?
Re: EGT Gauge
Try typing in "pyro" and see where that takes you... smiles.
Falco.
Falco.
Sent from my smart pad, using a pen.
Seek Beauty...
Good Ship Miss Lil' Bitchi
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Seek Beauty...
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
- loki
- Posts: 1428
- Joined: Sun Dec 16, 2007 12:18 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994 Delica Royal Exceed
- Location: Victoria, BC
Re: EGT Gauge
search egt*
- jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: EGT Gauge
Get the one that goes to 1500F
The 4M40 operates cooler on the exh/turbo side than the 4D56T especially with the larger exhaust.
The 4M40 operates cooler on the exh/turbo side than the 4D56T especially with the larger exhaust.
-
- Posts: 329
- Joined: Wed Sep 30, 2009 4:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 Pajero
- Location: Prince George BC
- Location: Prince George BC
Re: EGT Gauge
Thanks, just ordered the 1500F one, thats the info I wanted to know 

- Pajerist
- Posts: 270
- Joined: Sun Jun 03, 2007 9:15 am
- Vehicle: 1993 Pajero 2.8L 5-speed LWB
- Location: Vancouver, BC
Re: EGT Gauge
Please update with pics, if you have them of cause...
Thanks,
Thanks,