I have the two captain's chairs out of the van, but I'm left with four bolts stickinf about 3/4 inch up from the floor... They seem to be welded into the rails.
Is there a way to remove the slide rails in order to have a flat floor?
L300 Seat Bolts
-
VirtualJJ
- Posts: 62
- Joined: Thu Jan 07, 2010 4:31 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '93 L300 Exceed
- Location: Saskatoon, SK
-
fexlboi
- Posts: 1671
- Joined: Thu Jun 19, 2008 11:28 pm
- Member's Photo Album: http://dinoevo.de
- Vehicle: -
- Location: -
- Contact:
Re: L300 Seat Bolts
Yes there isVirtualJJ wrote:Is there a way to remove the slide rails in order to have a flat floor?
http://www.delica.ca/forum/dino-s-new-f ... -4282.htmlTake the carpet and insulation out and you will find more bolts for the rails.
-
Golf Cart
- Posts: 857
- Joined: Tue Jul 15, 2008 10:57 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Exceed
- Location: Maple Ridge
Re: L300 Seat Bolts
Mine has little cut outs along the sides of the rails that let you get at the bolts without ripping up the whole carpet.
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished