Spring Bushing Part # ??????

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
docsavage
Posts: 406
Joined: Sat Jul 22, 2006 2:48 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Deliless...
Location: Prince Rupert
Location: Prince Rupert

Spring Bushing Part # ??????

Post by docsavage »

Anybody have a part number for the leaf spring and shackle bushings?

Thanks


James
James

1989 Delica P24W Exceed
Panasonic CQ-TX5500W

Our online fabric shop: http://www.fishskinfabric.com
User avatar
BCDelica
Posts: 1808
Joined: Tue Jul 18, 2006 4:12 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=10008
Vehicle: WVO Powered Tuk Tuk
Location: Central Van Isle
Location: Somewhere with plenty of sun

Re: Spring Bushing Part # ??????

Post by BCDelica »

Hey James, I never did get a part number, just pulled the bushing off and run'em down the road the part store for replacement. It was quite easy to pull those 4 bolts and drop the axle on to a jack, makes me want to swap axles with my sweeties van (she has LSD). With your drive that's a pain, and all I vaguely remember (did hers two years ago) that the bushings were spec for a 92 Toyota P/U. Maybe.

No help here, i'm out here.

Kev - gone fishing. (9lbs Spring last night!!!! Yippee - first of the year)
Image Call me BCDelica-less
bryanc
Posts: 88
Joined: Thu Mar 01, 2007 11:26 pm
Vehicle: 91 ecxeed mtl gry over black
Location: victoria/metchosin

Re: Spring Bushing Part # ??????

Post by bryanc »

91 POUNDS ! how about posting a picture so we know your telling the truth and at the same time make us all envious.
josh
Posts: 868
Joined: Mon Jul 24, 2006 8:44 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 poptop gasser
Location: Vancouver, bC
Location: Vancouver, BC

Re: Spring Bushing Part # ??????

Post by josh »

bryanc wrote:91 POUNDS ! how about posting a picture so we know your telling the truth and at the same time make us all envious.
isn't that 9 pounds? (still huge if you ask me!) :-) 8-)

Josh
Post Reply

Return to “L300 Technical”