shampoo motor's WVO install by After Oil

WVO filtering, WVO conversion information, biodiesel fuel issues, etc.

Moderator: BCDelica

Post Reply
User avatar
after oil
Posts: 1436
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

shampoo motor's WVO install by After Oil

Post by after oil »

i did an install very much like mine recently. a good friend bought the van from me then hired me to install the same wvo system that my van runs. i am finallly getting around to posting the photos....

the filter

Image

the switch

Image

the heat exchanger/valve and the relays. the relays are for the glow plig inthe heat exchanger, and the assist pump

Image

the filter head installed behind the battery compartment

Image

the WVO assist pump

Image

the heater hoses TEEd in

Image

the filter installed

Image

new filler hole for tank

Image

return valve, at bottom of photo, and site filter...
Image

cutting the filler hole

Image

i cant seem to find the resit of the photos :oops: this will do for now!
User avatar
after oil
Posts: 1436
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

Re: shampoo motor's WVO install by After Oil

Post by after oil »

here are some more photos.. i dont seem to have one of the heat exchanger with all the hoses attached, but i think you get the idea...

the filler hose:

Image

the filler cap

Image
User avatar
delicat
Posts: 2331
Joined: Thu Jul 26, 2007 6:26 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '92 Exeed '93 Safari '94 Pajero
Location: New Westminster, BC
Location: New Westminster, BC

Re: shampoo motor's WVO install by After Oil

Post by delicat »

Nice work!

Should be nice not to have to deal with the install and just drive away on veggie! It's nice to say you've done it all by yourself but "T"ing some of those coolant/fuel lines, cutting some of those sheet metals... can be a real pain in the ass.

Nice to see you've used one of the stock tank for the veggie, saves on building another tank. How does it go with the fuel gauge?

Keep on converting them After Oil, there can never be enough of them on the road!

Cheers,
David
'93 Nissan Patrol
'94 Mitsubishi Pajero
Image

"If it ain't broken, modify it!"
User avatar
BCDelica
Posts: 1808
Joined: Tue Jul 18, 2006 4:12 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=10008
Vehicle: WVO Powered Tuk Tuk
Location: Central Van Isle
Location: Somewhere with plenty of sun

Re: shampoo motor's WVO install by After Oil

Post by BCDelica »

Nice Ari, but using a hoist............. that's cheating. :wink:

The fuel gauge will average the two tanks likely, or did you wire a resistor to the diesel tank sender to use just the Veggie tank with the gauge?

ChocdeeCap,
Kev
Image Call me BCDelica-less
User avatar
after oil
Posts: 1436
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

Re: shampoo motor's WVO install by After Oil

Post by after oil »

i didnt touch the fuel guages. we have BCDelicas old van kicking around as a for instance.
the install went well, but there is a slight pulsing of RPM when starting on WVO that clears itself after a minute. that vehicle is on its way to shambhala near nelson right now, as a real test!
User avatar
dfnder
Posts: 526
Joined: Wed Mar 05, 2008 9:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '91 Exceed
Location: Squamish

Re: shampoo motor's WVO install by After Oil

Post by dfnder »

On my computer none of the pictures loaded :(
User avatar
Artacoma
Posts: 569
Joined: Sat Mar 31, 2007 1:51 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 97 V6 LWB
Location: Victoria BC
Location: Victoria BC

Re: shampoo motor's WVO install by After Oil

Post by Artacoma »

Funny ..... pics loaded fine fine yesterday but wont this morning......
Rik
97 Series 2 V6 LWB
User avatar
after oil
Posts: 1436
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

Re: shampoo motor's WVO install by After Oil

Post by after oil »

im not sure why they wont load, i cant even see them on the page they are uploaded too. ill check it out later
Post Reply

Return to “WVO and Biodiesel”