new mods

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

Post Reply
User avatar
deli1733
Posts: 231
Joined: Thu Dec 31, 2009 1:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L-300 94 Pajero LWB
Location: Merville

new mods

Post by deli1733 »

some mods done over the past few months
Attachments
and finally i painted my rims a while ago
and finally i painted my rims a while ago
Summer 2010 117.jpg (181.37 KiB) Viewed 2588 times
Summer 2010 125.jpg
Summer 2010 125.jpg (159.78 KiB) Viewed 2588 times
upgraded to a 2.5 inch exhaust
upgraded to a 2.5 inch exhaust
Summer 2010 123.jpg (181.52 KiB) Viewed 2584 times
puttin in a pyro and booste gauge
puttin in a pyro and booste gauge
Summer 2010 122.jpg (152.47 KiB) Viewed 2584 times
Summer 2010 118.jpg
Summer 2010 118.jpg (191.34 KiB) Viewed 2583 times
Summer 2010 119.jpg
Summer 2010 119.jpg (214.9 KiB) Viewed 2586 times
here are my last few mods starting with this past long weekend i tackled my very rusty roof... cant find any of the pictures i had of it before but i put a polyurathane box liner on it after hours and hours of grinding sanding bondoing sanding and sanding
here are my last few mods starting with this past long weekend i tackled my very rusty roof... cant find any of the pictures i had of it before but i put a polyurathane box liner on it after hours and hours of grinding sanding bondoing sanding and sanding
Copy of Summer 2010 116.jpg (184.03 KiB) Viewed 2575 times
User avatar
Artacoma
Posts: 569
Joined: Sat Mar 31, 2007 1:51 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 97 V6 LWB
Location: Victoria BC
Location: Victoria BC

Re: new mods

Post by Artacoma »

Very Nice ...... Time to heatgun the plastic Mitsubishi box on the front bumper to make it black as your roof
Rik
97 Series 2 V6 LWB
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: new mods

Post by FalcoColumbarius »

Heat gunning the plastic draws oils deeper in the plastic to the surface. This will eventually result in the shroud cracking. Put a vinyl treatment on it in stead.

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Post Reply

Return to “Delica Modifications”