Headlights installation walk through

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
FredVenne
Posts: 338
Joined: Tue Jun 08, 2010 8:47 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Exceed Pop-Top, Pajero Exceed
Location: Quirpon, NL
Location: Newfoundland, Canada

Headlights installation walk through

Post by FredVenne »

Hi everyone,

I have looked on the forum extensively (again) and haven’t found a thread that explain or even show pictures on how to change the headlights (and the daytime module). If anyone has ever did this, I would like to see this post. If not, well, I am going to do it and will post photos later!

Thanks in advance and my apologies if this has already been posted.

Cheers guys!
fexlboi
Posts: 1671
Joined: Thu Jun 19, 2008 11:28 pm
Member's Photo Album: http://dinoevo.de
Vehicle: -
Location: -
Contact:

Re: Headlights installation walk through

Post by fexlboi »

Don't remember any step by step, but this one might help you to wire the headlights and DRL right http://www.delica.ca/forum/headlight-re ... -7815.html
User avatar
FredVenne
Posts: 338
Joined: Tue Jun 08, 2010 8:47 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Exceed Pop-Top, Pajero Exceed
Location: Quirpon, NL
Location: Newfoundland, Canada

Re: Headlights installation walk through

Post by FredVenne »

Thanks men!

I did saw this post but no walk through... and the daytime module is not the same I have. I will get some help with the daytime module, but it’s the headlights that I am interested... well... as I said, later today I will post the photos of what I did on this thread.

Fred
fexlboi
Posts: 1671
Joined: Thu Jun 19, 2008 11:28 pm
Member's Photo Album: http://dinoevo.de
Vehicle: -
Location: -
Contact:

Re: Headlights installation walk through

Post by fexlboi »

FredVenne wrote:Thanks men!
I did saw this post but no walk through... and the daytime module is not the same I have. I will get some help with the daytime module, but it’s the headlights that I am interested... well... as I said, later today I will post the photos of what I did on this thread.
Fred
This DRL is a custom relay module. Just make sure you don't wire your headlights straight to the headlight switch. Otherwise you will get problems down the road. Many people have burnt out their switch.
Changing the headlights are pretty straight forward. Buy Depo light assembly, take old headlights out, put new headlights in. Use old wiring harness and install the DRL relay from the post above.
User avatar
marsgal42
Posts: 772
Joined: Fri Jul 20, 2007 3:05 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: The Mighty Gumdrop
Location: Burnaby, B.C.

Re: Headlights installation walk through

Post by marsgal42 »

The main idea on the headlight assemblies is to remove the side marker first to get access to the headlight mounting bolts.

Look carefully when you remove the headlights, since the aiming screws are right next to (and look just like) the mounting bolts. I got burnt by this once.

You may need to juggle things a bit to reach the mounting bolts, but not have tools foul on the bull bar.

..laura
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: Headlights installation walk through

Post by FalcoColumbarius »

Here is a thread that may have opinions... smiles.

http://www.delica.ca/forum/here-s-how-t ... +headlight

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Post Reply

Return to “L300 Technical”