Anything cheap?

[FalcoColumbarius]

You could remove your crummy EGR valve and blank it out,It will lower your egt and slightly help your fuel economy,its also the perfect spot to mount a future pyro.
I can offer you 2 steel plates 1/4 thick drilled and painted with ceramic for $12.00 ( About what you would pay for a bottle of pink nail polish)
is that a cheap mod?
Cheers.

Firesong has removed his EGR and by the way ~ I said steal, not purchase. Nail lacquer is not cheap.

[Firesong]

Snorkel? Nah, why would I need to have that?
We don't flood here. :)

FS

[fexlboi]

Snorkel? Nah, why would I need to have that?
We don't flood here. :)
FS

Trust me, I didn't install a snorkel to go through deep rivers. At least not deeper than a "regular" Delica can do too.
Advantage of the snorkel is you will notice a significant drop in EGT as well as increase in power. In my opinion the best bang for your buck mod for performance and easy to do as well.

[RichD]

Go to Canadian Tire with a wad of CT bux and buy a cup holder. Screw/stick to some part of Delica. Mod complete.

[dennis_lambert]

You could remove your crummy EGR valve and blank it out,It will lower your egt and slightly help your fuel economy,its also the perfect spot to mount a future pyro.
I can offer you 2 steel plates 1/4 thick drilled and painted with ceramic for $12.00 ( About what you would pay for a bottle of pink nail polish)
is that a cheap mod?
Cheers.

Firesong has removed his EGR and by the way ~ I said steal, not purchase. Nail lacquer is not cheap.

Sorry I missed that he had an EGR Installed...just trying to help!!The nail polish comment was a joke... sorry if I offended you for not getting this correct!!

[Firesong]

Funny enough, getting a good cup holder from CT
was one of my first mods after buying the van.

I need to do that to my boat now. :)

FS

[Mbryant]

You could paint on a snorkel....in pink. Not really as good for performance but good for a conversation starter. Sorry not really helpful to the question but the the pink hearts comment made me laugh out loud.

If you were good with wood or plastic you could rebuild the center console as others have done in the past. To have a decent cup holder that you can reach.

Cheers

[FalcoColumbarius]

I got the idea from some of the girls on the Aussie site. Hearts is just a start, you could also do a unicorn/pegasus pony on the tailgate.

Falco.

[Super Exceeded]

Just installed a cup holder for my lady. $4.95 Pen holder from Staples, I wrapped the wire mesh before I installed it to waterproof it. It's easy to do, just remove the glove compartment first. Measure, predrill and size. Took me less than 10 minutes. (watch for wires!!!!)
Sorry about the first pic, not too sure what went wrong.

0911101358a.jpg (145.07 KiB) Viewed 4213 times

0911101404a.jpg (67.38 KiB) Viewed 4214 times

0911101419c.jpg (72.03 KiB) Viewed 4211 times

0911101419b.jpg (68.25 KiB) Viewed 4211 times

[Mbryant]

Hey that is a pretty cool idea. Not sure if I am brave enough to cut a hole in the dash but that is cool.

[thedjjack]

Hey that is a pretty cool idea. Not sure if I am brave enough to cut a hole in the dash but that is cool.

Ya, but remember he was cool enough to cut his Delicas in half!

[Super Exceeded]

Hey that is a pretty cool idea. Not sure if I am brave enough to cut a hole in the dash but that is cool.

Ya, but remember he was cool enough to cut his Delicas in half!

[Mbryant]

Right forgot that. Good point I suppose a small hole in the dash is really nothing compared to cutting a Deli in half!!!

[sasquatch-hunter]

Put Lambo door hinges instead of the sliding door!!

[Firesong]

I would never ever put a cup holder there
Asking for a big splash and then drink down into the stereo.
Ask me how I know.
Anything that spills off the dash can get down through the
vents, through the hole from the altimeter/temp gauge pod hole.
I made my friend pay for the stereo after I told him repeatedly
not to put anything up on there.

FS