My L400's power sunroof wont close. It will almost close but just cant quite make it down. Can I push it closed from the top? Or will that damage the locking mech?
Is this something any general mechanic can fix or do I need a Deli specialist?
Thanks all
Sunroof Stuck
-
- Posts: 145
- Joined: Thu Sep 02, 2010 10:26 am
- Vehicle: L400
- Location: BC
- Luna-Sea
- Posts: 762
- Joined: Mon Nov 24, 2008 4:35 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 90xeed+91cmnix,bth5spdz
- Location: Nanaimo BC
Re: Sunroof Stuck
http://www.delica.ca/forum/l400-front-s ... tml#p64154
and
http://www.delica.ca/forum/sun-roof-repair-8727.html
Not that I care too much about L400s,but the rain is a coming I suppose....
maybe this is the "wet-head" fix for the L400 bun-riders eh?
Right On!
and
http://www.delica.ca/forum/sun-roof-repair-8727.html
Not that I care too much about L400s,but the rain is a coming I suppose....
maybe this is the "wet-head" fix for the L400 bun-riders eh?

Right On!

-
- Posts: 145
- Joined: Thu Sep 02, 2010 10:26 am
- Vehicle: L400
- Location: BC
Re: Sunroof Stuck
Fortunately I live in the sunny Okanagan where it never rains!
Thx 4 the link
Thx 4 the link
-
- Posts: 1671
- Joined: Thu Jun 19, 2008 11:28 pm
- Member's Photo Album: http://dinoevo.de
- Vehicle: -
- Location: -
- Contact:
Re: Sunroof Stuck
Looks like the sunroof issue on the l400s is the new wet-floor front panel problem 

-
- Posts: 145
- Joined: Thu Sep 02, 2010 10:26 am
- Vehicle: L400
- Location: BC
Re: Sunroof Stuck
If I can not close the sunroof the final inch down can I push it down from the top or will this just bust the glass?
- jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: Sunroof Stuck
wind it all the way open. then wind it all the way shut using the allen key.
If that doesn't work, you may need to pull the motor out and slide the glass by hand closed. Once closed, then put the motor back in.
If that doesn't work, you may need to pull the motor out and slide the glass by hand closed. Once closed, then put the motor back in.