Inside temp not working

gramadin · Post by **gramadin** » Thu Nov 25, 2010 12:03 am

Hi,
my inside temp gauge is not working, it is blinking EO.
I did my research and is most likely thermistor not working, which is easy to change,
but only if you can find it.
Does anybody know where can I find one on the continent?
Thanks

Post by **nxski** » Thu Nov 25, 2010 12:09 am

I have the same problem, mine is listed as a steady -E though. Sorry I can't help but I'm looking forward to seeing what the problem is.

Profister · Post by **Profister** » Thu Nov 25, 2010 10:40 am

In most cases the culprit is the loose/broken connection to the sensor; check the wiring.

Raule Duke · Post by **Raule Duke** » Sun Nov 28, 2010 8:36 pm

the thermistor is attached to the little one inch square metal plate under the steering column.

gramadin · Post by **gramadin** » Sat Dec 11, 2010 8:09 pm

Thanks , I know where to find it in the car, I meant where to find a new one locally. English is not my first language

Any ideas?

RichD · Post by **RichD** » Sun Dec 12, 2010 11:01 am

You can have the sensor from my van. It's not being used.

gramadin · Post by **gramadin** » Sun Dec 12, 2010 7:22 pm

I would love to have it only if you dont use it.
I will send you pm.
Thanks

Delica Canada | Mitsubishi Van Club

Inside temp not working

Inside temp not working

Re: Inside temp not working

Re: Inside temp not working

Re: Inside temp not working

Re: Inside temp not working

Re: Inside temp not working

Re: Inside temp not working