A can of worms

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

User avatar
Super Exceeded
Posts: 620
Joined: Mon Aug 16, 2010 11:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1993 L300S
Location: South Surrey

A can of worms

Post by Super Exceeded »

Ok as most of you regulars know, My engine id kaput. So it has been suggested I go with a Mercedes 300TD.

So I'm gunna let loose withh the following question, partly because I would like some opinions on what you think I should do, but mostly for the lively 'debate' I am sure my question is about to unleash.

So, what do YOU think I should do? Engine wise that is!!
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: A can of worms

Post by FalcoColumbarius »

That's a five cylinder, yes? Good machines. My old man purchased one in 1976? or there abouts and had it to around 2006. How well does it fit in the Stretch? Both size and gears, &c., what are your plans for the drive train?

Falco.
(Happy Christmas, by the way.)
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: A can of worms

Post by jessef »

The 300D is the most robust diesel for the money you can put in there.

In my opinion, you'll get 99.9% armchair web quarterbacks that will google 300D merc's and just pass on any information you can come across on yer own.

Neil on the board here did a 300 merc transplant into his Gwagon last year. He would be the first person I would contact and ask questions on here.

The other option which is what I would do is speak with some experienced Mercedes diesel mechanics about your proposed transplant.

I would leave out the physical transplant as you will be the first to do this to my knowledge and just ask them engine vs torque vs drivetrain compatibilty goes (trans/bellhousing).

Only going based on your pictures and an approximate weight ballpark, the 300D would be my first choice as I can pick one up for cheap and spend the bulk of the funds on the transplant itself and driveline modification parts req'd.
User avatar
nxski
Posts: 3268
Joined: Tue Aug 31, 2010 6:27 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Delica L300 Super Exceed
Location: Coquitlam
Location: BC, Canada
Contact:

Re: A can of worms

Post by nxski »

I've always been a fan of toyota trucks. Any chance of fitting a Hilux engine or something along those lines in it? Diesel and Japanese is always a bonus. 8-)
Live the life you love, love the life you live...

Had: 1991 Mitsubishi Delica L300 SuperExceed, heavily modified (totalled by a drunk driver)
Have: 2011 Acura CSX manual, lightly modified
Want: Mitsubishi Pajero Evo

http://nes-design-construction.com
http://ca.linkedin.com/pub/nicolas-spurling/46/b48/924

Nicola Spurling
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: A can of worms

Post by jessef »

Only Toyo engine that is worth it is the 1HZ or 1HD-T but they are enormous.

The 300D is a strong engine that will run forever.

The Toyo hilux's are horrible. Even with the 3L head, still not a match for this beast.

If you can get a good low mileage 300D grab it.
User avatar
nxski
Posts: 3268
Joined: Tue Aug 31, 2010 6:27 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Delica L300 Super Exceed
Location: Coquitlam
Location: BC, Canada
Contact:

Re: A can of worms

Post by nxski »

jfarsang wrote:The Toyo hilux's are horrible. Even with the 3L head, still not a match for this beast.
In what sense?



(Grins...)
Live the life you love, love the life you live...

Had: 1991 Mitsubishi Delica L300 SuperExceed, heavily modified (totalled by a drunk driver)
Have: 2011 Acura CSX manual, lightly modified
Want: Mitsubishi Pajero Evo

http://nes-design-construction.com
http://ca.linkedin.com/pub/nicolas-spurling/46/b48/924

Nicola Spurling
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: A can of worms

Post by FalcoColumbarius »

I would like to add to my fellow member's endorsement of the Toyota



Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: A can of worms

Post by jessef »

No contest between the hilux 2.4 engine that cracks and the world known bulletproof 300D mercedes :-D

The top gear episode is awesome.
User avatar
K-Factor
Posts: 31
Joined: Thu Jan 14, 2010 9:59 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: LN106 Hilux, JD81Cruiser
Location: St. Lina AB

Re: A can of worms

Post by K-Factor »

Interesting.

I have owned a Hilux, but not the cheezzy kind with the disposable 2LT, no, I had the 3L (2.8l) NA and it was a very reliable unit. Gutless though, and not horribly economic on fuel. I would hazard a guess that it could replace the existing 2.5 DSM diesel, but you would hardly notice the difference. perhaps more torque, but a lot less snap, and the exact same overall power at I believe 89HP. The new ones coming out have a 5L turbo that would be nice - perhaps similar to a mitsu 2.8.

I also happen to have a landcruiser with a 1hd-T. That would power your unit very handsomely. It is actually not that huge in my opinion. I had a Toyota truck that I swapped the 22RE 4cyl out and put in a 5mte (I think that is the number )I6 out of a Supra, and it fit very well. I just needed a 3" body lift to get it not to hit the fire wall. Also used an electric fan on the front of the rad. I currently have a Delica with a 2.4 gasser, and am very disappointed with the economy and power. If I can't tune it up better soon, I am considering some kind of swap, and I think an inline 6 would fit very nicely in there. There is all kinds of room to increase the length with the shroud the way it is.

If I could I would try to find a mitsubishi alternative. I know my dad has a swather with a turbodiesel from mitsubishi in it. Check out the industrial options, like forklifts and tractors. A nmber of companies got them from Mitsu and built good machines around them. This makes parts etc quite available through dealerships etc.

PS, the Landcruiser is for sale! (Family outgrew the beauty, hence the Delica, and hence my disappointment with the power)


I will try to look for a few model numbers etc. and get back if I find anything.

KSY
User avatar
mararmeisto
Posts: 3276
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2018 Ram EcoDiesel
Location: Dartmouth, NS

Re: A can of worms

Post by mararmeisto »

Only thing I would suggest, but you're probably already ahead of me, is definitely something bigger. The 2500cc is a great little engine, but it's exactly that: a little engine. Other than that, it got nothing else. I'm not going to dazzle you with my armchair-mechanic prowess, but I will admit I'll be interested to read about what you ARE going to do to get the monster rolling again
JPL
I still miss my '94 Pajero!
User avatar
Super Exceeded
Posts: 620
Joined: Mon Aug 16, 2010 11:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1993 L300S
Location: South Surrey

Re: A can of worms

Post by Super Exceeded »

K-Factor wrote:Interesting.

I have owned a Hilux, but not the cheezzy kind with the disposable 2LT, no, I had the 3L (2.8l) NA and it was a very reliable unit. Gutless though, and not horribly economic on fuel. I would hazard a guess that it could replace the existing 2.5 DSM diesel, but you would hardly notice the difference. perhaps more torque, but a lot less snap, and the exact same overall power at I believe 89HP. The new ones coming out have a 5L turbo that would be nice - perhaps similar to a mitsu 2.8.

I also happen to have a landcruiser with a 1hd-T. That would power your unit very handsomely. It is actually not that huge in my opinion. I had a Toyota truck that I swapped the 22RE 4cyl out and put in a 5mte (I think that is the number )I6 out of a Supra, and it fit very well. I just needed a 3" body lift to get it not to hit the fire wall. Also used an electric fan on the front of the rad. I currently have a Delica with a 2.4 gasser, and am very disappointed with the economy and power. If I can't tune it up better soon, I am considering some kind of swap, and I think an inline 6 would fit very nicely in there. There is all kinds of room to increase the length with the shroud the way it is.

If I could I would try to find a mitsubishi alternative. I know my dad has a swather with a turbodiesel from mitsubishi in it. Check out the industrial options, like forklifts and tractors. A nmber of companies got them from Mitsu and built good machines around them. This makes parts etc quite available through dealerships etc.

PS, the Landcruiser is for sale! (Family outgrew the beauty, hence the Delica, and hence my disappointment with the power)


I will try to look for a few model numbers etc. and get back if I find anything.

KSY
send me a pm with your number pls
User avatar
Super Exceeded
Posts: 620
Joined: Mon Aug 16, 2010 11:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1993 L300S
Location: South Surrey

Re: A can of worms

Post by Super Exceeded »

Looks like I'm gunna try and get a cantor engine.
User avatar
mararmeisto
Posts: 3276
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2018 Ram EcoDiesel
Location: Dartmouth, NS

Re: A can of worms

Post by mararmeisto »

Super Exceeded wrote:Looks like I'm gunna try and get a cantor engine.
What is that, like 4500cc?
JPL
I still miss my '94 Pajero!
User avatar
Super Exceeded
Posts: 620
Joined: Mon Aug 16, 2010 11:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1993 L300S
Location: South Surrey

Re: A can of worms

Post by Super Exceeded »

mararmeisto wrote:
Super Exceeded wrote:Looks like I'm gunna try and get a cantor engine.
What is that, like 4500cc?
Ever seen a 6x6 smoke all 6 tires!!! :o
fexlboi
Posts: 1671
Joined: Thu Jun 19, 2008 11:28 pm
Member's Photo Album: http://dinoevo.de
Vehicle: -
Location: -
Contact:

Re: A can of worms

Post by fexlboi »

Beside the engine, what are your thoughts about the rest of the drive line? Which transmission are you going to use?
Post Reply

Return to “Delica Modifications”