jdm mechanic in edmonton

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
92pajero
Posts: 100
Joined: Thu Oct 14, 2010 9:55 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 pajero exceed
Location: edmonton ab

jdm mechanic in edmonton

Post by 92pajero »

Anyone looking for a jdm mechanic in edmonton? I have recently decided to carry on with my diesel ticket and am into the jdm's now if you need some work done lt me know and maybe I can help you out. Reasonable rates and always looking for a challenge. So far I have got a couple pajeros back on the road and a a few delis. Let me know what you think, I am always up for a challenge, everything from brakes, suspension to engine work. I know alot of places will not touch a jdm diesel but I will. Also I offer to look at it for nothing and just want more experience on the jdm side of the house.


Kelly
"Why are some peoples mouths in overdrive but their minds are in neutral"
dpd
Posts: 119
Joined: Tue Sep 04, 2007 12:11 pm

Re: jdm mechanic in edmonton

Post by dpd »

Hi Kelly, nice to hear you're around, I may take you up on a thing or two when the snow thaws.
I have been getting reduced fuel economy as of late, I am planning to do a diesel purge and see if that helps, do you think you could take a look?

Do you weld at all, or do body repairs? I have been carrying too much on my rear hitch and it is bending out the fender area where the hitch bolts. I'd like at least an opinion on what I can do about it. Are you working out of a shop or stall, or your home?

Are you licensed to do OOP inspections?
I don't need one myself...but I think it will come up in searches and be of use to people if you do.
David
User avatar
Spearo
Posts: 279
Joined: Mon Jun 08, 2009 3:03 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 Smellica Exceed
Location: Edmonton
Location: Edmonton

Re: jdm mechanic in edmonton

Post by Spearo »

Good to know. There is a guy in town who's good but it's at a premium IMO.
Would you do front-end stuff etc?

Cheers,
Erik
"I tell you, we are here on earth to fart around, and don't let anybody tell you different" - Kurt Vonnegut
Post Reply

Return to “L300 Technical”