valve settings
-
rdub
- Posts: 261
- Joined: Wed May 23, 2007 7:18 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Location: aldergrove
valve settings
anyone know the or have the valve setting specs my ticking is getting worse and lasting a long time im a little cocerned thanks
I am stable in most situations that I have no reservations in stormy conditions.
Re: valve settings
Under the engine cover. Mine says .25mm for both, I believe cold (I did mine cold). I also remember reading about the roller rocker tips failing but I wasn't sure if it was on the L300 or L400. When I did my adjustment (it was way out to lunch on 3, they were too tight), I loosened them all off and checked to make sure the roller tip wasn't all wobbly feeling. Then set the lash.