Help, R.H. front caliper
-
- Posts: 54
- Joined: Tue Oct 12, 2010 9:56 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94' L-400 Super Exceed
- Location: Calgary
Help, R.H. front caliper
Hey fellas, my L400 is in at kirkham auto for a set of front pads. Just got the call that the R.H. front caliper is siezed and I also need new caliper bolts. Can anyone point me in the right direction to attain these? My mechanic tried Rocky mountain imports but no luck so far. (I believe I am searching for same as 1994 Montero (3.0 L) calipers)
-
- Posts: 460
- Joined: Mon Nov 10, 2008 2:03 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994 l400
- Location: calgary Alberta
Re: Help, R.H. front caliper
when I replaced mine I got mine from maximum over drive in vancouver.... or call mardy they were shipped grey hound took me an hour and a half to install them if I were you I'd replace both as I did to save future hassle.....
- jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: Help, R.H. front caliper
NAPA Canada stocks them
94 Montero V6 3.0L
Or try Lordco and replace both if you can. If one is seized, the other may not be far behind and you'd have to repeat this process over again.
94 Montero V6 3.0L
Or try Lordco and replace both if you can. If one is seized, the other may not be far behind and you'd have to repeat this process over again.
-
- Posts: 54
- Joined: Tue Oct 12, 2010 9:56 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94' L-400 Super Exceed
- Location: Calgary
Re: Help, R.H. front caliper
Thanks for the advice guys, I will get a pair on order in the morning.
- jaggedfish
- Posts: 593
- Joined: Fri Jan 04, 2008 8:47 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 Crystal Lite SWB Exceed
- Location: Davis Bay, BC
- Location: Davis Bay, BC
Re: Help, R.H. front caliper
Ooh... that's a drag. Napa is a good place to get stuff... and they are pretty friendly too. Don't think we have Lordco here in Calgary, unfortunately. CCAuto on Vancouver Island is another good place for parts if you're ever stuck. Always good to have a few options in your back pocket.
Hope you get it done quickly so we can get back out to the bush for another trek very soon.
Cheers!
Ian
Hope you get it done quickly so we can get back out to the bush for another trek very soon.
Cheers!
Ian
Please check us out at http://www.beachsidebythebay.com or visit our Beachside by the Bay Facebook page.