L300 Rear Drive Shaft for Manual Transmission
Moderators: delicanuck, mark
- DandZ
- Posts: 24
- Joined: Sun Dec 23, 2007 3:29 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica '92 Exceed
- Location: Vancouver
L300 Rear Drive Shaft for Manual Transmission
After removing ours and placing it in my husbands work van - we awoke the next morning to find his van stolen. so now we need another decent one. we have a L300 5-speed. we need the Rear Drive shaft for Manual Transmission. We live in East Vancouver but we're willing to go to wherever we can find one of these in the lower mainland. Any help or leads would be welcome. *dalyn
Last edited by DandZ on Fri Sep 02, 2011 2:51 pm, edited 1 time in total.
- jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: L300 Rear Differential for Manual Transmission
Sure it's not the rear (manual) driveshaft you need ?
http://www.delica.ca/forum/rear-diff-pi ... 05-30.html
http://www.delica.ca/forum/rear-diff-pi ... 05-30.html
- Rising Sun Auto Import
- Posts: 1366
- Joined: Sat Nov 08, 2008 10:45 pm
- Vehicle: dealer#31128, L400 super exceed
- Location: New Westminster, BC
- Location: New Westminster, BC
- Contact:
Re: L300 Rear Differential for Manual Transmission
Contact ccautos ( Van Island ) as ccautos has been a good used part supplier.
Steven

Steven
Rising Sun Auto Import Inc.
**Ultimate Home of Delica in North America**
**Korea D4BF( 4D56 ) Complete Engine & New Block Import &Installation**
Delica Injection Pump Rebuilt, Cold Start & Engine/Turbo Work Specialist
Unlimited source for new & used parts
**Ultimate Home of Delica in North America**
**Korea D4BF( 4D56 ) Complete Engine & New Block Import &Installation**
Delica Injection Pump Rebuilt, Cold Start & Engine/Turbo Work Specialist
Unlimited source for new & used parts
- DandZ
- Posts: 24
- Joined: Sun Dec 23, 2007 3:29 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica '92 Exceed
- Location: Vancouver
Re: L300 Rear Drive Shaft for Manual Transmission
yup, i'm an idiot. i changed the post. thanks!