Anyone has the stock setting spec. of the l400 fuel pump screw? Mine has been crack lose but want to reset to factory. Anyone has done this before? Any help will be greatly appreciated.
Cheers,
DC
stock setting of the fuel pumo screw
-
davidwwc
- Posts: 180
- Joined: Thu Oct 14, 2010 4:30 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994L400 Delica
- Location: Burnaby Bc Canada
-
FalcoColumbarius
- Site Admin
- Posts: 5983
- Joined: Tue Jan 22, 2008 1:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
- Vehicle: Delica; Chamonix GLX ('92 P25W)
- Location: North Van, BC, eh?
Re: stock setting of the fuel pumo screw
Are you talking about the set screw under the deployment tubes on the injector pump?
Falco.
Falco.
Sent from my smart pad, using a pen.
Seek Beauty...
Good Ship Miss Lil' Bitchi
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Seek Beauty...
Good Ship Miss Lil' Bitchi...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
-
davidwwc
- Posts: 180
- Joined: Thu Oct 14, 2010 4:30 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994L400 Delica
- Location: Burnaby Bc Canada
Re: stock setting of the fuel pumo screw
The screw which has a shield on it at the back of the fuel injection pump. It is set from the factory.
It has been shield off and set back a little to help fuel economy. I want to reset it back to original spec setting.
Cheers,
DC
It has been shield off and set back a little to help fuel economy. I want to reset it back to original spec setting.
Cheers,
DC