mechanical aptitude anyone?

Topics may eventually be moved to other Delica Canada forums.

Moderators: BCDelica, mark

Post Reply
Adrock
Posts: 750
Joined: Fri Jan 12, 2007 11:02 am
Member's Photo Album: http://www.delica.ca/Photos/
Location: Richmond B.C.

mechanical aptitude anyone?

Post by Adrock »

check this out
http://www.forddoctorsdts.com/quizzes/M ... titude.php

its a cool test, takes a bit of time but it gets the brain turning a little which is nice.

i got 82%, with a few brain farts, but an accurate representation of how i'd do solving these problems on a regular basis.

Love to know what some of you guys get...
"if its so hard to pull on your knob, put some greese/wd40 on the shaft and pull in and out, that should make it happen for you."
-westcoastnewbie
Image
User avatar
jrman
Posts: 506
Joined: Thu Aug 16, 2007 12:29 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 MMC Delica Exceed - Scoobus

Re: mechanical aptitude anyone?

Post by jrman »

80%....felt about right to me....some good questions there for sure!
Tks.
Sean in North Van
1991 Delica Exceed - Scoobus
User avatar
Schwa
Posts: 480
Joined: Tue May 01, 2007 5:16 pm
Vehicle: 1992 Delica Exceed
Location: Coquitlam
Contact:

Re: mechanical aptitude anyone?

Post by Schwa »

86%
User avatar
Grungle
Posts: 51
Joined: Thu Oct 18, 2007 8:32 pm
Vehicle: 2008 Delica D5
Location: Australia

Re: mechanical aptitude anyone?

Post by Grungle »

Hmmm, 86%... (and I'm a mechanical Engineer!).
I'm gonna blame it on the electrical questions.

Good quiz though. I'd be interested to compare the results with some other forums, I know I've seen this on a big dirt-bike forum somewhere too...
9 provinces and 27 US states in an L300...
6 Australian states and territories (so far!) in a D5!
EricN
Posts: 394
Joined: Tue Aug 07, 2007 7:49 am
Vehicle: 90 exceed
Location: Coquitlam

Re: mechanical aptitude anyone?

Post by EricN »

Did it the other day and got 2 wrong, dont know what the percentage was. I didnt pay attention to the balloon question and the piston sucking air in question was a tough call, between the 2, I guessed wrong.
User avatar
robinimpey
Posts: 299
Joined: Sun Sep 02, 2007 7:48 pm
Vehicle: 1991 Starwagon
Location: Strathmore, AB

Re: mechanical aptitude anyone?

Post by robinimpey »

Got 90% so send all your mechanical questions my way! Just jokes! :?
Green1
Posts: 3257
Joined: Wed Jul 19, 2006 9:18 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 L400 Royal Exceed PF8W
Location: Calgary Alberta Canada
Contact:

Re: mechanical aptitude anyone?

Post by Green1 »

88%... a few stupid mistakes, and a couple that I really don't know how I would have known...
Post Reply

Return to “General Discussion”