Black Ice has taken Po for a little spin and impacted my passenger side quarter panel. Will post pictures tomorrow. Basically crunched in at an angle creating a crinkle half way between the back and the wheel well. hit a barrier backwards at an angle. Will need to replace. let me know if you are parting something out and if we can cut this part out. the slider for the sliding door has not been affected, but below and above have been bent. cut out from a parts car is needed. thanks.
Sprout
http://www.greensongsanctuary.com
Rear passanger quarter panel.
Moderators: delicanuck, mark
-
- Posts: 3
- Joined: Mon Oct 11, 2010 9:48 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica L300
- Location: Slocan, BC
- Location: Slocan, BC
- Contact:
- Rising Sun Auto Import
- Posts: 1366
- Joined: Sat Nov 08, 2008 10:45 pm
- Vehicle: dealer#31128, L400 super exceed
- Location: New Westminster, BC
- Location: New Westminster, BC
- Contact:
Re: Rear passanger quarter panel.
We may help you if we figure out the exact damage spot through pics.
Steven
Steven

Rising Sun Auto Import Inc.
**Ultimate Home of Delica in North America**
**Korea D4BF( 4D56 ) Complete Engine & New Block Import &Installation**
Delica Injection Pump Rebuilt, Cold Start & Engine/Turbo Work Specialist
Unlimited source for new & used parts
**Ultimate Home of Delica in North America**
**Korea D4BF( 4D56 ) Complete Engine & New Block Import &Installation**
Delica Injection Pump Rebuilt, Cold Start & Engine/Turbo Work Specialist
Unlimited source for new & used parts