Panel/trim clips for rear door

lettereleven · Post by **lettereleven** » Sat Mar 10, 2012 5:34 pm

Hi there

I wondered of anyone knew of a good place to get rear door panel clips. I've seen a few on eBay but if anyone has personal experience, I am eager to hear it.

I am also looking for driver /pass door panel clips, but not with the same urgency.

Thanks very much

Jamie

MardyDelica · Post by **MardyDelica** » Sat Mar 10, 2012 7:00 pm

you can buy those thru local fastener store or any body shop supplier near your place
not hard to find just bring sample an dyou can find it
cheers;
Mardy

aclarker · Post by **aclarker** » Sat Mar 10, 2012 7:21 pm

Hard to find in Calgary, I ordered clips from cc auto. Napa has clips, although none fit...

lettereleven · Post by **lettereleven** » Sat Mar 10, 2012 7:34 pm

Perfect thank you both. I will try shopping around with a sample in hand.

DelicaMark · Post by **DelicaMark** » Sat Mar 10, 2012 9:36 pm

I had to get some of these for my rear door panel too. I'm sure I got some Christmas tree style clips from either CT or Lordco. Just make sure you get approximately the right size and they work better than the stock ones.

MardyDelica · Post by **MardyDelica** » Sun Mar 11, 2012 10:29 am

hi, guys,
dont look in to lordco, or napa they dont have it try them they say they dont have.
go to the auto fastener store where they sell plastic clip for the body shop.
if you guys need it maybe i can buy it for you guys if you getting hard time to get this as i have good resource
for this clip dealing with body shop store.
just send me thesample pictures and will try the availability for you guys
cheers;
mardy

lettereleven · Post by **lettereleven** » Thu Mar 22, 2012 9:38 am

For those using "Search" to find panel/trim clip information -

After searching through about 100 different clips, I found these clips at Lordco that work really well.
Best part is that they are really easy to identify. They are the only ones that are bright yellow!

They are Ford clips, (i think 1/8" diameter). Sorry I dont have the SKU number.

: clip.JPG (29.02 KiB) Viewed 5489 times

DelicaMark · Post by **DelicaMark** » Thu Mar 22, 2012 10:26 am

Those are exactly what I used and I still think they are better than the stock ones...sorry Mardy.

MardyDelica · Post by **MardyDelica** » Thu Mar 22, 2012 11:12 am

no problem,
i am glad you guys find away to get this cheers;
mardy

lettereleven · Post by **lettereleven** » Fri Apr 06, 2012 5:18 pm

Here is the part number.

Apparently they are out of stock though. Arg, as I need a bunch more.

Delica Canada | Mitsubishi Van Club