Page 1 of 1
Need Rims for my Pajero
Posted: Wed Oct 12, 2011 1:16 pm
by littlepaj
Hi Everyone,
I'm new here. I just bought a 1991 Pajero (MKII). So far so good... I'm really enjoying it.
Anyhow, I need some rims for a set of winter tires. Does anyone have a set they are willing to sell?
What other rims can I use for this?
Am I correct that only L400 rims will fit it... I found this information floating around.
Mitsubishi L300 Delica center bore hub = 106mm
Mitsubishi Montero/Pajero Gen I = 106mm
Mitsubishi L400 Spacegear center bore hub = 108mm
Mitsubishi Montero/Pajero Gen II = 108mm
Thanks
Pajero rims
Posted: Wed Oct 12, 2011 1:53 pm
by littlepaj
Hi. I need some rims for my 1991 2nd gen Pajero for snow tires.
Does anyone have a set of rims they want to sell me?
Re: Pajero rims
Posted: Wed Oct 12, 2011 5:11 pm
by alti2d
Sure!
But I'm in Ft. McMurray, AB. Just took the old set off am trying to figure out what to do with them now. They work, but could use a little TLC to spiff 'em up...
Re: Need Rims for my Pajero
Posted: Wed Oct 12, 2011 6:38 pm
by Raule Duke
I Can't say for the Gen 1/L300's but you are rite that your truck has a 108mm Center
almost all Toyota truck rims will fit so you should do all rite looking in a scrap yard or on C list!!
(for sure all the Tacoma Pickups and 4Runners will fit but "some" of the Tundras have 110mm center)
Re: Pajero rims
Posted: Wed Oct 12, 2011 7:40 pm
by jessef
Chevy, Nissan and Toyota rims with 6x5.5 bolts pattern and 4" of backspacing
Just be sure measure the hub center bore. It's 108mm
Re: Pajero rims
Posted: Thu Oct 13, 2011 2:42 pm
by littlepaj
Hey!
Thanks for the tips.
Jfarsange, what do you mean by "4" of backspacing"?
And... Jfarsang... I found the post where you wrote "What I did not realize at the time was that most Toyota trucks have a 106mm center bore hub diameter"
...But Raule Duke says almost all Toyota rims will work!
So... who do I believe!?
Sorry! I don't know anything about wheels. Thanks for the help guys!
Re: Pajero rims
Posted: Thu Oct 13, 2011 2:48 pm
by littlepaj
I found this site:
http://wheelsupport.com/toyota-bolt-patterns/
It looks like Tacoma/4runner wheels have 106mm centre bore.
Raule Duke, do you have any experience mounting these on a Pajero? Are there some 4runners with a 108mm bore?
Re: Pajero rims
Posted: Thu Oct 13, 2011 3:40 pm
by jessef
Most toyota wheels have a center bore diameter of 106mm
Mitsubishi 2nd gen Pajero/L400's have a center bore diameter of 108mm
meaning if you buy a toyota wheel that has a 106mm center, you will need to bore it out/grind an extra 2mm to allow it to fit onto the Mitsubishi 108mm hub.
with that said, I have yet to see an aftermarket toyota wheel under 108mm center (perfect for Pajero/L400)