Mystery jack?

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
User avatar
thaspect
Posts: 34
Joined: Fri Feb 03, 2012 11:47 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica L400
Location: South Island
Location: Saanich, B.C.

Mystery jack?

Post by thaspect »

Found this under the passenger seat, any ideas?
ImageUploadedByTapatalk1343243850.460447.jpg
ImageUploadedByTapatalk1343243850.460447.jpg (118.31 KiB) Viewed 2711 times
User avatar
CREGAN
Posts: 1094
Joined: Thu Sep 24, 2009 8:05 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SpaceGear Super Exceed
Location: Leduc, Alberta

Re: Mystery jack?

Post by CREGAN »

Heated seats maybe?
User avatar
Mr. Flibble
Posts: 1393
Joined: Tue Nov 03, 2009 7:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 L400 Royal Exceed
Location: Issaquah, Washington
Location: Issaquah, Washington

Re: Mystery jack?

Post by Mr. Flibble »

I have a nearly identical jack for my heated seats in my Royal.
Canadian living in Washington USA
User avatar
thaspect
Posts: 34
Joined: Fri Feb 03, 2012 11:47 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica L400
Location: South Island
Location: Saanich, B.C.

Mystery jack?

Post by thaspect »

That could be very cool (one day)
User avatar
Mr. Flibble
Posts: 1393
Joined: Tue Nov 03, 2009 7:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 L400 Royal Exceed
Location: Issaquah, Washington
Location: Issaquah, Washington

Re: Mystery jack?

Post by Mr. Flibble »

thaspect wrote:That could be very cool (one day)
Better off to install a "new" heated seat kit from Amazon. Will set you back about $50/seat and puts out more heat faster than the old Delica seats do. It will take about 1.5-2 hrs to do your first seat, then under an hour to do your second.

http://www.delica.ca/forum/heated-seats-12155.html
Canadian living in Washington USA
Post Reply

Return to “L400 Technical”