Page 1 of 1

L400 Inside tailgate opener

Posted: Sun May 01, 2016 7:48 pm
by thelazygreenfox
One disappointing item missing on the L400 that the L300 has is an inside tailgate opener :-( . If your L400 has one please post pics...

Every time I camped I wanted one. Now nobody knows when I get up to pee at night. LOL

So I built one... :-D

Just follow the pictures, remove the strap closure and pop off the tailgate cover. Remove the plastic film that covers the door frame.
P1020330 (800x600).jpg
P1020330 (800x600).jpg (248.1 KiB) Viewed 2575 times
The 6 plastic 2 pce. closers can't be reused. Just order new ones, see the mitsu number. The other plastic closers are okay but the main ones are usually hooped.
P1020328 (800x600).jpg
P1020328 (800x600).jpg (273.05 KiB) Viewed 2575 times
I used stainless cable (attached to the top of the door rod) and a small pulley bolted to the frame then drilled a few extra holes for a straight run and left the handle hidden inside the little door for changing your taillight bulbs.
P1020329 (800x600).jpg
P1020329 (800x600).jpg (227.31 KiB) Viewed 2575 times
The cable is joined with downrigger copper tubes and the handle is tubing from my air bag lines.
P1020327 (800x600).jpg
P1020327 (800x600).jpg (205.36 KiB) Viewed 2575 times

An extra picture.
P1020331 (800x600).jpg
P1020331 (800x600).jpg (255.37 KiB) Viewed 2575 times
Replace the plastic, the new clips , pop the plastic cover back on and screw on the strap handle. Presto and now the door can be opened from the inside.
Enjoy :-D :-D
MD

Re: L400 Inside tailgate opener

Posted: Sun May 01, 2016 9:44 pm
by Mr. Flibble
Nice!

I have thought of doing that and using a low profile door handle from some junker.

Still, yours is operational and I don't have one....