Page 1 of 1
nozzles
Posted: Sun Feb 25, 2007 7:12 am
by argo
I've found a source for nozzle assemblies. It works out to about $150 for a set of four if I buy five sets
Is anyone out there interested?
Posted: Sun Feb 25, 2007 10:57 am
by Kuan
Argo,
Excuse my ignorance, what are the nozzles for?
Thanks
Kuan
Posted: Sun Feb 25, 2007 9:18 pm
by argo
They are fuel injector nozzles. They very seldom need much more than a good cleaning. My engine has a cold start miss and it's likely due to a fouled injector. I figure if I'm going to R&R the injectors I'll renew the nozzles.
Before I do that I reckon I'll dump a bottle of injector cleaner in the tank and drive over the hat a few times.
There's something to add to the technical thread!
Posted: Wed Feb 28, 2007 5:36 pm
by delicanuck
Apparently, driving over hats will clean your nozzles. Who knew?
Posted: Thu Mar 01, 2007 9:29 pm
by argo
It's a very big hat