Page 1 of 1
Torsion Bars
Posted: Fri Aug 07, 2009 9:56 am
by flyfishn
Does anyone know where I can get my torsion bars cranked or de-cranked?
Re: Torsion Bars
Posted: Fri Aug 07, 2009 10:18 am
by jessef
any shop or backyard mechanic that has a pair of 17mm wrenches
Re: Torsion Bars
Posted: Fri Aug 07, 2009 3:34 pm
by delica 304
As I scroll down to read the replies, the first thing I see is Sears Furniture Outlet(Sponsor link), which got had me saying, Man, they are really expanding!
Re: Torsion Bars
Posted: Sat Aug 08, 2009 12:36 am
by MardyDelica
go to westcoast alignment they can do it for you.
thanks
Re: Torsion Bars
Posted: Sat Aug 08, 2009 4:00 am
by delicat
Actually,
http://www.delica.ca/forum/don-t-waste- ... =alignment
But if you don't want to make the drive then WCA will work...
Re: Torsion Bars
Posted: Sun Aug 09, 2009 11:51 am
by marsgal42
Any remotely competent mechanic can wind the torsion bars up. Any remotely competent shop can check the wheel alignment. There is nothing special about the Delica in either respect.
I bit the bullet and got new torsion bars for Gumdrop last summer. It wasn't that expensive, and should do for another 15 years.
...laura