Here is the tank next to the new plastic one i was going to use but now don't need to..
New Expansion Tank Mod
Moderator: BCDelica
-
Flemwad
- Posts: 8
- Joined: Fri May 07, 2010 2:00 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: l400 royal
New Expansion Tank Mod
Due to Expansion tank failures and expensive engine repair if not discovered quickly, i decided to be the first to get a custom marine grade Ali tank made, i will be trying to get measurements made up so if you guys want one made up ,you can give it to a local fabrication shop or you may be able to order one as our Delicaclub OZ is looking at doing a bulk deal..
Here is the tank next to the new plastic one i was going to use but now don't need to..
Here is the tank next to the new plastic one i was going to use but now don't need to..
-
mdrive
- Posts: 528
- Joined: Tue Nov 07, 2006 3:09 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Location: Richmond, BC
- Contact:
Re: New Expansion Tank Mod
you can buy a new one for $65 that will last for another 10 years, why go through so much work? it looks nice though.
MAXIMUM OVERDRIVE AUTO IMPORTERS
4-7900 RIVER ROAD, RICHMOND, BC V6X1X7
TEL: 604-726-3109 Email: Sales@maxoverdrive.ca
For Vehicles visit: http://WWW.MAXOVERDRIVE.CA
For Online Parts Store, visit:http://www.maxoverdrive.ca/parts/.
-
mararmeisto
- Posts: 3276
- Joined: Wed Sep 19, 2007 10:00 am
- Vehicle: 2018 Ram EcoDiesel
- Location: Dartmouth, NS
Re: New Expansion Tank Mod
Is the cost going to be low enough to make this a fiscally reasonable substitute?mdrive wrote:you can buy a new one for $65 that will last for another 10 years, why go through so much work? it looks nice though.
JPL
I still miss my '94 Pajero!
I still miss my '94 Pajero!