Rear passengers seat belt (92 l300)

Zebruken · Post by **Zebruken** » Wed May 17, 2017 3:28 pm

In need of a complete rear passengers seat belt.

Dhelgren · Post by **Dhelgren** » Sat Dec 02, 2017 9:19 am

I have a 91 super exceed that I am no longer using the rear bench. If it’s the same we could work something lit.

Dave

Post by **Growlerbearnz** » Sat Dec 02, 2017 1:26 pm

Is your middle row Captains chairs or bench seat? Do you need middle row or rear row? 3-point belts or lap belts? Retractable or static? (Yes, it sounds like I'm being an ass, but I've just gone through this with my own van- there's a ridiculous range of seatbelt configurations out there).

If you get desperate, I've ordered belts from https://www.seatbeltplanet.com/ before, and they're great.

phalteman · Post by **phalteman** » Mon Dec 18, 2017 3:43 pm

Growlerbearnz wrote:Is your middle row Captains chairs or bench seat? Do you need middle row or rear row? 3-point belts or lap belts? Retractable or static? (Yes, it sounds like I'm being an ass, but I've just gone through this with my own van- there's a ridiculous range of seatbelt configurations out there).

If you get desperate, I've ordered belts from https://www.seatbeltplanet.com/ before, and they're great.

Growler, do you remember which ones you ordered? I missing the driver's side retractable shoulder/lap belt for the middle row, and have been keeping an eye out but haven't found a replacement.

I looked at the site, and it seems like the generic ones (this one: https://www.seatbeltplanet.com/seatbelt ... 25/view/59) might work fine. Is that what you've done?

Thanks!

Post by **Growlerbearnz** » Mon Dec 18, 2017 5:06 pm

I have 140" end release buckle with the 8" sleeve (https://www.seatbeltplanet.com/seatbelt ... 25/view/61), ready to install on my captains chairs (buckle attached to the chair where the original retractible lap belt went, retractor and lower mount in the C-pillar, shoulder loop on the C-pillar).

I haven't actually installed them yet, but they should work fine.

phalteman · Post by **phalteman** » Wed Dec 20, 2017 11:32 am

Growlerbearnz wrote:I have 140" end release buckle with the 8" sleeve (https://www.seatbeltplanet.com/seatbelt ... 25/view/61), ready to install on my captains chairs (buckle attached to the chair where the original retractible lap belt went, retractor and lower mount in the C-pillar, shoulder loop on the C-pillar).

I haven't actually installed them yet, but they should work fine.

Those look perfect. Thanks very much!

bigsleep55 · Post by **bigsleep55** » Tue Oct 16, 2018 10:25 am

Growlerbearnz wrote:I have 140" end release buckle with the 8" sleeve (https://www.seatbeltplanet.com/seatbelt ... 25/view/61), ready to install on my captains chairs (buckle attached to the chair where the original retractible lap belt went, retractor and lower mount in the C-pillar, shoulder loop on the C-pillar).

I haven't actually installed them yet, but they should work fine.

Hey @Growlerbearnz, did you end up installing this? I’m needing both driver and passenger front seat replacements. Wondering which part number to order from seatbeltplanet

Post by **Growlerbearnz** » Tue Oct 16, 2018 12:52 pm

I did, but that's on the rear captains chairs. The front seat belts are shorter- you're just going to have to measure them