K&N Filter for 4M40

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
User avatar
DelicaFreaka
Posts: 113
Joined: Sat Oct 03, 2009 9:03 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 4M40
Location: Okanagan B.C.

K&N Filter for 4M40

Post by DelicaFreaka »

Does anyone have the part # handy for the K&N filter used on the 4M40? Thanks.
********** Starship Delica **********
"To boldly go where no man has gone before"
Image
Manitoba deli
Posts: 431
Joined: Fri Sep 18, 2009 9:08 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 l300, 94 l400 lwb, 97 l400 S II
Location: Manitoba

Re: K&N Filter for 4M40

Post by Manitoba deli »

The number I had received from some friends in the U.K. was E-2871 I just ordered it yesterday, so I won't know for at least a week (I hate paying freight so I told the supplier to get it in his stock order). The number was good,as sometimes the UK numbers don't work here. I'll let you know when it shows up. They also told me the number for the 96 l400 is E-2877. gonna keep that number handy for when I buy another Delica in a couple of years.

Jason
User avatar
DelicaFreaka
Posts: 113
Joined: Sat Oct 03, 2009 9:03 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 4M40
Location: Okanagan B.C.

Re: K&N Filter for 4M40

Post by DelicaFreaka »

Manitoba deli wrote:The number I had received from some friends in the U.K. was E-2871 I just ordered it yesterday, so I won't know for at least a week (I hate paying freight so I told the supplier to get it in his stock order). The number was good,as sometimes the UK numbers don't work here. I'll let you know when it shows up. They also told me the number for the 96 l400 is E-2877. gonna keep that number handy for when I buy another Delica in a couple of years.

Jason
Thanks J
********** Starship Delica **********
"To boldly go where no man has gone before"
Image
User avatar
PHIL
Posts: 114
Joined: Sun Aug 31, 2008 9:39 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 97 PajEvo, 92 Strada, 03 Montero
Location: Airdrie

Re: K&N Filter for 4M40

Post by PHIL »

The Paj uses the 2871 on the 4M40. Same unit as the 2.5. Can't speak for a Deli, but would assume its the same!
1997 Pajero Evolution no.581
1992 Strada 4-door pickup
2003 Montero XLS
User avatar
almac
Posts: 717
Joined: Mon Jul 06, 2009 1:29 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '91 Delica "Tessen"
Location: Okanagan
Location: Okanagan, BC CANADA

Re: K&N Filter for 4M40

Post by almac »

there should be a 'sticky' somewhere on this site for part numbers for everything... :?
Roads!? Who the hell needs roads!?,
al
Image
91' Delica "Tessen", 5spd, RS9000XLs, camperized.
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: K&N Filter for 4M40

Post by jessef »

The Spacegear 2.8 parts and the Pajero 2.8 parts are interchangeable.

It's the Delica 2.5 and Pajero 2.5 parts where are few are different such as the air filter (placement due to cab over vs. standard hood arrangement)
User avatar
DelicaFreaka
Posts: 113
Joined: Sat Oct 03, 2009 9:03 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 4M40
Location: Okanagan B.C.

Re: K&N Filter for 4M40

Post by DelicaFreaka »

jfarsang wrote:The Spacegear 2.8 parts and the Pajero 2.8 parts are interchangeable.

It's the Delica 2.5 and Pajero 2.5 parts where are few are different such as the air filter (placement due to cab over vs. standard hood arrangement)
I called Napa and gave them the number for the filter and they said it doesn't exist in their system. These parts numbers are hit and miss. How does one get a K&N filter for these vehicles????
********** Starship Delica **********
"To boldly go where no man has gone before"
Image
User avatar
PHIL
Posts: 114
Joined: Sun Aug 31, 2008 9:39 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 97 PajEvo, 92 Strada, 03 Montero
Location: Airdrie

Re: K&N Filter for 4M40

Post by PHIL »

That's wierd. Auto parts plus had it on file, and had me one the next day. IIRC, Crappy Tire had it in their system as well. K&N E1012.
1997 Pajero Evolution no.581
1992 Strada 4-door pickup
2003 Montero XLS
User avatar
storm80y
Posts: 86
Joined: Tue Feb 19, 2008 7:08 pm
Vehicle: Vanyaneros
Location: Canmore, AB

Re: K&N Filter for 4M40

Post by storm80y »

Delica Wiki http://wikrad.com/delica/index.cgi?air_filters

:edit:
Just realised only the L300 part numbers are listed there, but perhaps you guys could start adding this knowledge to the wiki as it's editable if you create an account.
User avatar
DelicaFreaka
Posts: 113
Joined: Sat Oct 03, 2009 9:03 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 4M40
Location: Okanagan B.C.

Re: K&N Filter for 4M40

Post by DelicaFreaka »

I struck gold @ Lordco. I will have my new filter Saturday.....Wahoooooo!!!
********** Starship Delica **********
"To boldly go where no man has gone before"
Image
pajerry
Posts: 501
Joined: Mon Jul 13, 2009 6:20 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94' SWB Pajero, 94' LWB Pajero 3.5L
Location: Calgary
Location: Calgary

Re: K&N Filter for 4M40

Post by pajerry »

What did that run you at Lordco?

Are there prices competitive with other places such as crappy tire?


Heres what google found in 0.3 seconds.. http://www.knfilters.com/search/product ... rod=E-2871
'94 SWB Pajero 2.8L ITD, '94 LWB Pajero 3.5L DOHC 8-)
User avatar
DelicaFreaka
Posts: 113
Joined: Sat Oct 03, 2009 9:03 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 4M40
Location: Okanagan B.C.

Re: K&N Filter for 4M40

Post by DelicaFreaka »

pajerry wrote:What did that run you at Lordco?

Are there prices competitive with other places such as crappy tire?


Heres what google found in 0.3 seconds.. http://www.knfilters.com/search/product ... rod=E-2871
$65 plus tax. Not sure what crappy tire charges or if they have them.........Kirk out.
********** Starship Delica **********
"To boldly go where no man has gone before"
Image
Manitoba deli
Posts: 431
Joined: Fri Sep 18, 2009 9:08 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 l300, 94 l400 lwb, 97 l400 S II
Location: Manitoba

Re: K&N Filter for 4M40

Post by Manitoba deli »

I ordered mine, but I must be special, because its coming on the next space schutle or something. 8 week delivery time. It's sometimes hard living in the middle of small town manitoba, and trying to support local business.
Jason
madmazda
Posts: 460
Joined: Mon Nov 10, 2008 2:03 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 l400
Location: calgary Alberta

Re: K&N Filter for 4M40

Post by madmazda »

K&N part number E 2877 it fits the flange thus sealing the unit completely no open bottom I get mine in a week or so looks in the K&N parts list to be more correct than the E 2871 one for the l 400
Post Reply

Return to “L400 Technical”