Want to have access to all Mitsubishi models part numbers based on a chassis number? Here is Mitsubishi ASA (Aftersales Support Application) which is used by dealers worldwide.
Download page: http://www.dsm-club.org/forum/faily/159 ... ation.html
* This download link is provided as required by the owner of the DSM Club site.
Summary
- download RAR archives
- unpack
- mount/burn ISO images
- install ASA
- apply crack
- restart Windows
- run the application
Details
Downloaded files are RAR packages containing ISO images. After unpacking the images (the password is the domain name for http://www.dsm-club.org) you can either burn them on CDs or mount them using DAEMON Tools, Power ISO etc.
Install.
After the installation you have to copy mmData.dll from the folder 'crack' into the corresponding folder i.e.:
jap - c:\MMC\ASA\M00\PROG\
usa - c:\MMC\ASA\M50\PROG\
eur - c:\MMC\ASA\M60\PROG\
asia - c:\MMC\ASA\M80\PROG\
Run MMC.reg from the folder 'crack', reboot Windows.
Windows x64 users should use this REG file: http://files.dsm-club.org/asa/MMCx64.zip
PS. I installed it on 2 PC's and it works.
NB. I believe this post belongs to the FAQ and Downloads but I did not want to put it into a specific model subsection; it is up to moderators where to move it.
Mitsubishi ASA (Aftersales Support Application)
-
Profister
- Posts: 963
- Joined: Fri Feb 08, 2008 3:41 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1999 PE8W Chamonix, EFI
- Location: North Vancouver, BC
Mitsubishi ASA (Aftersales Support Application)
- Attachments
-
- ASA Japan download
- Download_resize.JPG (118.91 KiB) Viewed 16374 times
-
- ASA installation
- asai2.jpg (67.83 KiB) Viewed 16373 times
-
- ASA installation
- asai3.jpg (123.7 KiB) Viewed 16371 times
-
- ASA installation
- asai4.jpg (85.54 KiB) Viewed 16372 times
-
- ASA screenshot
- asa_jap1_resize.jpg (104.11 KiB) Viewed 16372 times
-
- ASA screenshot
- asa_usa3_resize.jpg (166.2 KiB) Viewed 16372 times
Last edited by Profister on Mon Nov 01, 2010 5:13 pm, edited 1 time in total.
Re: Mitsubishi ASA (Aftersales Support Application)
Richard Dagenais
-
Profister
- Posts: 963
- Joined: Fri Feb 08, 2008 3:41 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1999 PE8W Chamonix, EFI
- Location: North Vancouver, BC
Re: Mitsubishi ASA (Aftersales Support Application)
Quoted from the link in above post: 'Installation is pretty complicated and I've translated it from Russian.' 
Really?!
Really?!Re: Mitsubishi ASA (Aftersales Support Application)
Installation is pretty complicated, to be fair. I got it built and updated, and it works fine. 
Things I was able to do: search out a part, and then find what other vehicles use same part. That is very revealing and useful information.
Things I was able to do: search out a part, and then find what other vehicles use same part. That is very revealing and useful information.
- ASATEST.JPG (177.73 KiB) Viewed 16245 times
Last edited by RichD on Mon Nov 01, 2010 8:25 pm, edited 1 time in total.
Richard Dagenais
-
Luna-Sea
- Posts: 762
- Joined: Mon Nov 24, 2008 4:35 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 90xeed+91cmnix,bth5spdz
- Location: Nanaimo BC
Re: Mitsubishi ASA (Aftersales Support Application)
Vantastic ,good one!
Right On!
Right On!
-
tonydca
- Posts: 646
- Joined: Tue May 19, 2009 9:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 L400 Exceed - yeah, baby!
- Location: Vancouver BC
- Location: Vancouver BC
Re: Mitsubishi ASA (Aftersales Support Application)
Good find! I'm in the process of downloading the files at the moment.
I'm curious if anyone has done any cross-referencing between the Japan SW and the USA SW. (assuming USA = Canada = N America for Mitsu's sake)
For example, if you take the Japanese version S/W, select a Japanese market vehicle, choose a part (say, "water pump housing"), presumably the S/W will dutifully spit out a Mitsubishi part number.
If you them enter that part number into the USA S/W, can you then find the vehicle sold in the USA which uses that same part #?
A cross-market, corss-reference table like that would be *very* useful... Wondering if anyone's tried yet.
Tony.
I'm curious if anyone has done any cross-referencing between the Japan SW and the USA SW. (assuming USA = Canada = N America for Mitsu's sake)
For example, if you take the Japanese version S/W, select a Japanese market vehicle, choose a part (say, "water pump housing"), presumably the S/W will dutifully spit out a Mitsubishi part number.
If you them enter that part number into the USA S/W, can you then find the vehicle sold in the USA which uses that same part #?
A cross-market, corss-reference table like that would be *very* useful... Wondering if anyone's tried yet.
Tony.
Cry "Havoc!" and let slip the elementary-school-aged boys...
-
dennis_lambert
- Posts: 321
- Joined: Tue Sep 29, 2009 7:24 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 2 L300 exceed high roofs
- Location: Kelowna BC
Re: Mitsubishi ASA (Aftersales Support Application)
Thanks for providing this!
I am having troubles most likley due to being a computer idiot.
So I down load the zip file then unzip it...and trying to find these "Iso files" to burn....to disc..and thats where Im lost...
When you run the exe and eventually it asks for disc 2 is this the disk with the iso images on?
I am sorry I am a little confused!!
Thanks for your help.
I am having troubles most likley due to being a computer idiot.
So I down load the zip file then unzip it...and trying to find these "Iso files" to burn....to disc..and thats where Im lost...
When you run the exe and eventually it asks for disc 2 is this the disk with the iso images on?
I am sorry I am a little confused!!
Thanks for your help.