Project Λ300 Greece

[Lupus]

Hi there again.!!!
My L300 is now for body repairing ang paint. I trying to find some parts I need for my mods. Most of them (mods) allready posted from others so it is not nesasery to post the same again.
But I need some help.
1st. I have a set (4) brand new tyres BFG mud 33-10.5-15 from my old 4x4 and 4 allu rims 7x15 from a '91 Pajero. I know that best is 31-10.5-15 with 2" lift. What can I do to use these tyres?
2nd. Can somebody send me 2 spacers (1")
3rd. Are Bilstein shocks ok?
Thanx in advance.

[tiitus]

I think, if you have 2" lift, then 33" tyres are ok..?

[fexlboi]

I have a set (4) brand new tyres BFG mud 33-10.5-15 from my old 4x4 and 4 allu rims 7x15 from a '91 Pajero. I know that best is 31-10.5-15 with 2" lift. What can I do to use these tyres?

You need to lift the Delica more than just 2" to run 33" unless you only drive on a flat road, but be prepared to do quite a bit of body panel cutting. Also it's hard to say if the offset of the rims is correct for your van.
In my opinion, these tires are too large and have way too many disadvantages on a l300, but to each their own.

[Lupus]

Thanx... I must sell 33's.... this van is allaround, not extreme off road but off road to.
So, I must use 31's.
Can I buy a pair of lift spacers 1" from anybody?

[gramadin]

You can buy spacers on Ebay, I am sure they will ship to Greece.
Good luck.

[Lupus]

There is no lift spacers in ebay, only a pair of shakles.
But there is an Australian site that he had spacers, 2 type of snorkels and fender extensions but I cant find it again.
If somebody give me the dimentions I can build the spacers here...
This time I finish with the body and painting then I will load the parts with extra weight (lpg tank, drawers, air compressor, tube bumpers and steps) and then I will fix the suspension.
I need the spacers and a set of fenders. If somebody has there and he want to sell them pplease send pm.

[fexlboi]

But there is an Australian site that he had spacers, 2 type of snorkels and fender extensions but I cant find it again.

http://www.delicashop.com

[Lupus]

Yes... thanks man...

[Lupus]

I have 2 options:
1st. Buy a set of fender extensions from "delicashop". No need of door sliding extensions.!!!!
2nd. Buy a set of BIG fenders AND door sliding extensions from somebody who has both.
I like more the 2nd option IF somebody has BOTH.
Is there anybody who sell them?

[fexlboi]

No, at least not in Canada. You probably going to have more luck in Japan or Australia.