Delica Canada | Mitsubishi Van Club

I'm not a fan of the rebuilding option. I live in the mountains and am pretty hard on the turbo and having read previous posts about how important the balance is I'm not really convinced that just replacing seals and a bearing is a good idea. Thanks for that suggestion though! Plus the turbo that ca...

Hi folks, So my Turbo died. The wastegate clip broke off and it's been puking oil internally (white smoke after a descent) as well as externally. So I pulled the offending turbo and ordered a new one off aliexpress.com which is a chinese wholesaler website. Huge mistake! The turbo arrived with a bro...

Hi guys, I have been doing some work on my bus. I have replaced the inner and outer tie rod ends, things are MUCH tighter now going over bumps and handling. But now I notice a noise and a vibration that I am having a hard time placing. It's a constant whum whum whum noise that increases with speed, ...

Where did you get the rebuild kit from? I have a leaky turbo and am not afraid of getting a little dirty.

Marc

Thanks guys. In will be installing it the first warm day we get here in the Rockies. I figured it was as easy as drilling my own hole but wanted to see if anyone had routed with an existing hole. I cheers
Marc

Perfect, thank you. I already have the t and hose to run to my boost Guage. How did you route through the fire wall to get into the interior?

Hi guys, I finally purchased my boost Guage and am looking to install it tomorrow. What airline have you guys tapped into? Can you use the one from the top of the EGR? Is it boost controlled like a tdi or is there one off the top of the manifold. Interested to see what pressure I'm getting out of my...

Hi Guys, I just got my van back from my Alberta inspection. The main issue is that my Inner left tie rod is rusted and the boot is cracked. Are these something my local mechanic can remove and replace? Also any suggestions on who to buy these parts off online? I was looking at Coombs auto and they h...

Thanks Snelson,
Loving the van! Looking forward to many Km's with it.

Marc

Thanks for that! Not a bad price for them either. I might pick up a set. Have you used them much for any off road or snow driving? They seem to be strong?

Marc

Thanks Guys! For twenty dollars shipped I certainly will be ordering my blanking plates tonight. Has anyone put their EGT probe in them as suggested? I still have black smoke issues so I think the valve may have been stuck open and am happy to remove any extra useless materiel from the engine anyway...

Hi thanks for the tips. I have been looking on Ebay but haven't really come across anything. Couldn't link to your photos could you send me a link? Thanks.

Marc

Hi guys, So I have been driving my Van quite a bit too and from work and have been noticing a whine that starts as soon as the van is moving and increases in volume and speed as I speed up, very consistant. Plus I am getting a shake, rattle that increases with speed coming from Left side. I have bee...

Thanks! I figured it had something to do with disabling the EGR but I had assumed they would have just pulled and blanked it. I am ordering a blank asap and also going to do what you suggested and put my EGT probe in it. Also planning on putting a boost gauge in so this will all work perfectly. Than...

Thanks guys!
It is in fact Snelsons L300 from Banff. Super excited to have it and looking forward to starting the modification and upgrade process. What great Van's i'm pretty happy to finally have one.

Marc