Delica Canada | Mitsubishi Van Club

Yep deffo the Battery (or a battery problem of somekind i.e. terminals) in my opinion. I had exactly the same problem when my 2 and a half year old daughter left one of the roof map reading lights on whilst playing and car was parked for 4 days before my son noticed the dull glow comming from the bu...

Most L300 squeals are belt related and most common one to go is the Alternator belt, it can be retentioned easily enough (or belt replaced if old) but its a real pig to get too to adjust. Sometimes the alternator itself becomes loose from the mounting bolts and they need retightening. Both myself an...

Have you checked your front brake calipers are not siezed? Might need new sliding pins/caliper seals replacing.
See if your hubs are hot when you are getting the burning smell (this would also account for your high MPG).

hmmm, not happy as this was last stage of doing my 2" lift and now im stuck with stock size wheels/tyres untill I can sort this. I got the set of 4 alloys with already fitted tyres from ebay and went to pick them up myself and owner turned out to be a deli club member. Anyway, If I got a set of...

I have a set of j15 6jj 33 mark2 shogun alloys that came pre fitted with 31 10.5 r15 A/T tyres on. http://i647.photobucket.com/albums/uu199/BFG_01/Wheels-1.jpg I read somewhere that 31/10.5/r15's are too wide to fit 6" rims properly and can pop off when cornering!. Ive checked for writing on my...

I have a set of j15 6jj 33 mark2 shogun alloys that came pre fitted with 31 10.5 r15 A/T tyres on. http://i647.photobucket.com/albums/uu199/BFG_01/Wheels-1.jpg I read somewhere that 31/10.5/r15's are too wide to fit 6" rims properly and can pop off when cornering!. Ive checked for writing on my...

Managed to sort it out earlier today, I removed bump stops 1st (even though they were cut down to 40% size), jacked deli alot higher than I did 1st time, dropped onto stands and removed the jack, took wheels off and undid the torsion bar lock nut and adjuster bolt all the way off and straight away I...

Okies, heres the scoop, the rear of my L300 is lifted (extended shackles, Brake pipe extended & 2" shock extenders) On the front ive fitted 1" ball joint spacers and jacked up the torsion bars as far as they can go and i'm hitting a brick wall regarding reindexing the torsion bars to g...

L300 Grease points..



Ref the front grease points, they are mirrored on the oposite side so theres 11 in total.

Okies, ive installed my remote central locking kit and its working fine on front doors + side door. Im left with 2 wires to install for boot unlock and sidelights or hazard light function. I now need to know what wire to splice into on the dash mounted Hazard switch and boot lock/unlock dash mounted...

This is what ive gleaned so far on reindexing my front torsion bars on my L300 as passenger side is adjusted to the max and I need a bit more for my 2" lift... Jack the Deli up and put on Axel stands Remove the nuts on the tbar adjustment threads completely. Make a tipex mark on the Tbar rubber...

Mitsubishi also charge a small fortune for a direct Mitsi replacement.

If you look below your steering wheel on the plastic roughly where your knees would be,theres a small 1cmX1cm metal plate clipped on. This is the Thermistor that registers the Internal temperature. When mine went I unclipped the metal plate, scraped off the glue substance that was holding the old th...

Mine came in the post a few days ago, many many thanks :D

BFG, you can talk to me or to our Russian member NAKAMI who is in Russia but his English writing is perfect so one of us can negotiate with delicaclub.ru. Anybody else interested? :O I would love a Russian Club sticker!! Definately put me down for one, I have paypal and am happy to pay for it and p...