Delica Canada | Mitsubishi Van Club

Can anyone tell me where I can get a winch mount to fit a Gen II Pajero?

Thanks

I am looking for the part number I need to order for the fuel stop solenoid on the 4M40 engine with mechanical pump. This is the black capped vertical diesel cutoff or fuel stop solenoid. I have the part number for the green capped horizontal restriction valve (Bosch 9461615275 or Zexel 146650-5820)...

Manufacturer - Zero Start Model number - TMR310-0101 400 watt Cost locally in Calgary was $38.00 from an Auto Value Made for a CAT Diesel engine Take the center or furthest back frost plug (core plug) out from the passenger side of the 4M40 block (I used the center one directly behind the injection ...

I cannot say if this will ultimately apply to you being that the trailer is over 15 years old. There may be other methods that could be applied - read on. It is possible, but a nightmare - even on a newer trailer that did not have the north american compliance certs. A customer of mine related his s...

At this point I am sending emails to some UK wreckers to get one shipped in. Least expensive and quickest option to get a replacement

Gerry

Based on the condition, it is not a good candidate for welding.

Gerry

My original is hooped. Big hole in it from the connecting rod. I need a replacement.

Gerry

Hi jason,

I'm in Calgary. I called Rising sun and they do not have one. Have a call in to CCAuto to see. Just waiting to hear back. If you have another suggestion I would love to hear.

Thanks,

Gerry

Hi Guys, Just swapping in a L400 4M40 block into my Pajero. Swapping over the accessories I ran into a couple of problems. One I will solve by drilling a hole in the block (for the dipstick). The second is the oil pan. They are different. Mine is hooped. Does someone have an oil pan kicking around f...

My Pajero is a 2.8 so my experience will be different from your but I tow up to 4500 lbs on the weekends in the summer for camping. No issues whatsoever. Had other issues with the vehicle related to useless mechanics but none as a result of towing. No speed demon on the hills, but she runs cool and ...

If it is the same design as the Pajero on the rear the e Brake shoes are inside the rotor and likely the culprit. You need to pull the rear rotor to see them (at least that's how I was finally able to see mine. Mine was actually the rear caliper at the back side. When I changed out the damaged rotor...

I would also be interested in a complete snorkel kit for a 95 Pajero 4M40 (gen II). Can we get a group buy going again? A good option I have located is http://www.ebay.com.au/itm/Complete-Snorkel-Kit-Mitsubishi-Pajero-NH-NK-1990-97-4x4-diesel-petrol-/180938025370?pt=AU_Car_Parts_Accessories&hash...

Problem was solved when the original issue was fixed (we have had this for a while). The oil that was spilling out the valve cover breather from the factory defective valve system had been replaced a few days before. Now the oil was clearing from the intake system and intercooler. We could never eve...

I have a 1995 Pajero 4m40. Turbo was getting worse and worse. More black smoke and i noticed throttle would cause boost pressure to drop. I was starting to climb hills at 40km per hour instead of 100 to 110 and pushing. This was a replacement turbo that a bad mechanic said I needed for another issue...

Got my rims over the winter from a nice user in BC. Thanks