Are these for curtains?

Topics may eventually be moved to other Delica Canada forums.

Moderators: BCDelica, mark

Post Reply
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Are these for curtains?

Post by macro »

Hey everyone, my van didn't come with curtains, but I have a feeling they were pilfered before I bought it. can someone tell me what these thingamajigs are for? I'd like to reuse whatever stock bits are already installed. I'm obviously missing the rails, how are the stockers attached? What are people using for the rails for curtains if their van didn't come with them? Thanks!
Bottom
Image
Top
Image
Side
Image
User avatar
Big-Bird
Posts: 1218
Joined: Thu Dec 08, 2011 5:57 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=20974
Vehicle: 96 PE8W Spacegear
Location: Calgary

Re: Are these for curtains?

Post by Big-Bird »

Yep, those plugs cover the holes for a clip that holds an aluminum upper and lower curtain rail. The semi clear snap clip is to secure the curtains to a pillar at either end of the curtains. Curtain assemblies from a wrecked/parted out deli are not very common and the factory rails follow the contour of the inner panel.

What the VW crowd has done is use a vinyl covered spring wire or tension wire method and secure it at opposite ends of a side window. The wire acts as the curtain rod so the fabric just loops over it with an open sleeve. There are probably some ideas in the 1970's Boler and Tent Trailer curtains. I know IKEA had a tension wire curtain kit but thats for homes.
Yeah I joined the Dark Side because the medical plan is top shelf!

Image
Rattlenbang
Posts: 647
Joined: Sun Dec 16, 2012 8:29 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: delica
Location: Victoria

Re: Are these for curtains?

Post by Rattlenbang »

I found a set at a local wreckers. They are out there, but the quality is meh. You can just about see through them. Cheaper to make your own set and with a nicer pattern and cloth.
My new novel A Dark and Promised Land has just been released by Dundurn Press. "On the eve of war he is compelled to reclaim her love, setting himself against his people amid a conflict that will form a nation." http://www.darkpromisedland.com/
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Re: Are these for curtains?

Post by macro »

Big-Bird wrote:Yep, those plugs cover the holes for a clip that holds an aluminum upper and lower curtain rail. The semi clear snap clip is to secure the curtains to a pillar at either end of the curtains. Curtain assemblies from a wrecked/parted out deli are not very common and the factory rails follow the contour of the inner panel.

What the VW crowd has done is use a vinyl covered spring wire or tension wire method and secure it at opposite ends of a side window. The wire acts as the curtain rod so the fabric just loops over it with an open sleeve. There are probably some ideas in the 1970's Boler and Tent Trailer curtains. I know IKEA had a tension wire curtain kit but thats for homes.
Thanks! I was thinking about that wire but I reeeeeally don't want to screw anything into the interior panels if I can help it. It just feels wrong somehow... I'm sure I'll get over it. I'll pop those plugs off, maybe there's something underneath I can attach too.
Post Reply

Return to “General Discussion”