Rear end parts L400

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
stever1000
Posts: 258
Joined: Fri Apr 13, 2012 5:25 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SuperExceed
Location: Vancouver

Rear end parts L400

Post by stever1000 »

Hello,

I just purchased a L400 and need to replace these parts:

Rear stabilizer joints
Trailing arm bushings

How/where can I source these parts? Can I replace them myself? I looked in the L400 manual PDF and can't find the specific parts

Any help would be greatly appreciated

Thanks
EricE
Posts: 44
Joined: Tue Nov 23, 2010 7:02 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 l400 swb
Location: Victoria

Re: Rear end parts L400

Post by EricE »

Get you parts threw Rocky Mountain imports http://www.rockymountainimports.net/
Had mine done at a shop. .
User avatar
MardyDelica
Posts: 2190
Joined: Sun Jan 14, 2007 3:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: DL#30843 /92 Delica Super Exceed
Location: Richmond B.C.
Contact:

Re: Rear end parts L400

Post by MardyDelica »

well buzz me in I have all those parts in stock and can installed it easy
cheers
ImageImageImage
stever1000
Posts: 258
Joined: Fri Apr 13, 2012 5:25 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SuperExceed
Location: Vancouver

Re: Rear end parts L400

Post by stever1000 »

If I buy the parts can I replace them myself, or do they require special tools?

Thanks
User avatar
MardyDelica
Posts: 2190
Joined: Sun Jan 14, 2007 3:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: DL#30843 /92 Delica Super Exceed
Location: Richmond B.C.
Contact:

Re: Rear end parts L400

Post by MardyDelica »

hi, u need a special tools to take it out from one is the hardest one need to do alignment
cheers
ImageImageImage
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Re: Rear end parts L400

Post by macro »

Sway bar links are easy DIY, trailing arm bushings need a press from what I know.
stever1000
Posts: 258
Joined: Fri Apr 13, 2012 5:25 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SuperExceed
Location: Vancouver

Re: Rear end parts L400

Post by stever1000 »

macro wrote:Sway bar links are easy DIY, trailing arm bushings need a press from what I know.
Thanks, that is very helpful!
Post Reply

Return to “L400 Technical”