Black smoke

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
Rosco
Posts: 1
Joined: Mon Sep 14, 2015 6:54 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica
Location: BC Canada

Black smoke

Post by Rosco »

My Delica L400 runs fine when its cold but pings like crazy when you start off warm and blows black smoke. I changed the injectors but that didn't help. Anyone have an idea what I should do?
User avatar
Big-Bird
Posts: 1218
Joined: Thu Dec 08, 2011 5:57 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=20974
Vehicle: 96 PE8W Spacegear
Location: Calgary

Re: Black smoke

Post by Big-Bird »

The EGR valve is the usual culprit. When the EGR opens at the wrong time it messes with the combustion cycles and creates huge plumes of black smoke and NO POWER!!! The quick fix is to remove the vacuum line that activates the vaccum pot and plug the rubber hose with a small machine screw.

The options to deal with this long term are:
1) Replace the EGR with a new one. (4 bolts and out it comes!)...a bit pricey but it does help reduce the emmissions by pulling unburned exhaust gasses back though for combustion. It also help reduce the exhaust manifold temps which also helps extend turbo life expectency.....(unburned fuel vapours can continue to burn in the exhaust pipe after the exhaust cycle (aka: huge smoke plumes) because there isn't enough oxygen...

2) Install a Blanking Plate Kit that essentially isolates the 2 ports that the EGR connects to. This prevents the system from opening and messing with things..this is the more common fix.
Yeah I joined the Dark Side because the medical plan is top shelf!

Image
Krazyistkarl
Posts: 137
Joined: Thu Dec 18, 2014 8:45 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 96 2.8D and 98 V6 SWB HR Chamonix's
Location: Saskatoon

Re: Black smoke

Post by Krazyistkarl »

I'll just add that a blanking plate kit is like $20

And another disadvantage to having an EGT valve still in place is circulating tiny soot particles back through the engine
Post Reply

Return to “L400 Technical”