Steel wheels...stock size

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
Katabatic
Posts: 48
Joined: Tue Jun 19, 2007 10:46 am

Steel wheels...stock size

Post by Katabatic »

I am looking to get plain black steel wheels to replace my banged up alloys...I am a little confused at the numbers kicking around for wheels...DeliWiki states 6 x 139.7mm (6 x 5.5") PCD OFFSET +25~+30mm. Does any one know if any of the Winter steel rims from Crappy Tire fit? does the 15x7, 6-5.5 fit. If not where can someone locate such wheels?
User avatar
Golf Cart
Posts: 857
Joined: Tue Jul 15, 2008 10:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Exceed
Location: Maple Ridge

Re: Steel wheels...stock size

Post by Golf Cart »

Katabatic.

try this

http://www.delica.ca/forum/backspacing-2542.html

Also , try typing "backspacing" in the search function. It will give you just about everything everyone has ever done with tires , rims , what fits , what doesnt . Jesse seems to have this down to a science. I trust his findings. Just look at Granola !!

Ukranian Tire has winters on for 47 bucks this week in 15 inch.

Also, there are some rims to be had on Craigslist this past week

Good luck
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished
Post Reply

Return to “L300 Technical”