Steel wheels...stock size
Steel wheels...stock size
I am looking to get plain black steel wheels to replace my banged up alloys...I am a little confused at the numbers kicking around for wheels...DeliWiki states 6 x 139.7mm (6 x 5.5") PCD OFFSET +25~+30mm. Does any one know if any of the Winter steel rims from Crappy Tire fit? does the 15x7, 6-5.5 fit. If not where can someone locate such wheels?
- Golf Cart
- Posts: 857
- Joined: Tue Jul 15, 2008 10:57 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Exceed
- Location: Maple Ridge
Re: Steel wheels...stock size
Katabatic.
try this
http://www.delica.ca/forum/backspacing-2542.html
Also , try typing "backspacing" in the search function. It will give you just about everything everyone has ever done with tires , rims , what fits , what doesnt . Jesse seems to have this down to a science. I trust his findings. Just look at Granola !!
Ukranian Tire has winters on for 47 bucks this week in 15 inch.
Also, there are some rims to be had on Craigslist this past week
Good luck
try this
http://www.delica.ca/forum/backspacing-2542.html
Also , try typing "backspacing" in the search function. It will give you just about everything everyone has ever done with tires , rims , what fits , what doesnt . Jesse seems to have this down to a science. I trust his findings. Just look at Granola !!
Ukranian Tire has winters on for 47 bucks this week in 15 inch.
Also, there are some rims to be had on Craigslist this past week
Good luck
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished