Can you guys help with this sensor/wire - what is it??

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
snelson
Posts: 406
Joined: Sat Jan 26, 2008 6:29 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 Delica Exceed
Location: Banff
Location: Banff, Alberta

Can you guys help with this sensor/wire - what is it??

Post by snelson »

While under the Delica greasing all the points I found a dangling wire that leads to a sensor but i don't know what it's for.

Here's a pic of the little sensor 'clip' that the wire is supposed to attach to:
Image


Here's a pic of the wire, you can see the exposed wire where the little sensor is supposed to be attached. And the actual sensor is just left of the centre of the photo (you can see a round little screw that the wire/clip is supposed to attach. The photo is taken straight up from under the van. Can anyone tell me what this sensor does? Oil temp or pressure maybe?

Thanks guys,
Steve
Image
User avatar
robinimpey
Posts: 299
Joined: Sun Sep 02, 2007 7:48 pm
Vehicle: 1991 Starwagon
Location: Strathmore, AB

Re: Can you guys help with this sensor/wire - what is it??

Post by robinimpey »

That is your oil pressure sending unit.
User avatar
snelson
Posts: 406
Joined: Sat Jan 26, 2008 6:29 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 Delica Exceed
Location: Banff
Location: Banff, Alberta

Re: Can you guys help with this sensor/wire - what is it??

Post by snelson »

Ooh - a rather important one! Thanks Robin. :-)
Steve
Post Reply

Return to “L300 Technical”