L400 Front & Rear Sway Bar bushing kits

Pacific JDM Parts · Post by **Pacific JDM Parts** » Sun Jul 05, 2009 8:49 pm

For sale brand new front and rear sway bar bushing kits for L400 delica.Kits are availaible in 30mm or 31mm front bar and 25mm or 23mm
rear bar.Bushings are Polyurethane and come with new nuts and washers.
Kits are $30 plus taxes and shipping.

ccautos · Post by **ccautos** » Mon Aug 03, 2009 11:47 am

After dealing with several of these vans now through our repair shop it is becoming more apparent that almost every L400 requires new sway bar links and mounts.

Drumster · Post by **Drumster** » Mon Aug 03, 2009 8:52 pm

ccautos wrote:After dealing with several of these vans now through our repair shop it is becoming more apparent that almost every L400 requires new sway bar links and mounts.

What would indicate to a driver that these links & bars are due for replacement?
Thanks.

jessef · Post by **jessef** » Mon Aug 03, 2009 9:06 pm

Knocking noise in the front and vibrations.

Jack up the front end and have someone turn the wheel full tilt from one side to another. At the end of the full turn you may see the sway bar and/or control arm move due to worn bushings.

ccautos · Post by **ccautos** » Tue Aug 04, 2009 6:00 am

The most obvious symptom is the knock rattle when driving over small bumps/uneven road. You can feel the problem by holding the sway bar and pulling up and down near the end link and near the mounting bushes. As you pull up and down you will feel and see movement in both the link and mount bush.