L300 mechanical questions (transmission and ladder specs)

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
Firesong
Posts: 1363
Joined: Tue Feb 03, 2009 9:03 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1998 L400 Delica Chamonix
Location: Saskatoon
Location: Saskatoon, SK. Canada

L300 mechanical questions (transmission and ladder specs)

Post by Firesong »

Hi
Need some information regarding the following. I have a 1990 L300 manual tranny Delica.
As we know the std tranny's are geared lower. But is the actual lower gearing
a result of the transmission or the rearends?
I have access to the rear ends / axles off a '94 Delica (not free though) and was thinking that this might be a cool upgrade. What are your thoughts on this?

Ladder question:
Will a high roof rear ladder fit a low roof Delica? The ladder is 57" in height. It's not in my possession (nor in my city) or I could check it out myself.

Thanks for the info guys (& gals)

J
User avatar
marsgal42
Posts: 772
Joined: Fri Jul 20, 2007 3:05 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: The Mighty Gumdrop
Location: Burnaby, B.C.

Re: L300 mechanical questions (transmission and ladder specs)

Post by marsgal42 »

Stick shift Delicas have different ratios in their differentials. The transmission has nothing to do with it.

...laura
User avatar
Firesong
Posts: 1363
Joined: Tue Feb 03, 2009 9:03 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1998 L400 Delica Chamonix
Location: Saskatoon
Location: Saskatoon, SK. Canada

Re: L300 mechanical questions (transmission and ladder specs)

Post by Firesong »

I actually got some dimensions of the ladder involved and answered one question - doesn't fit.

Anyone have some knowledge on the gearing / tranny etc question?

J
User avatar
Firesong
Posts: 1363
Joined: Tue Feb 03, 2009 9:03 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1998 L400 Delica Chamonix
Location: Saskatoon
Location: Saskatoon, SK. Canada

Re: L300 mechanical questions (transmission and ladder specs)

Post by Firesong »

Thanks Laura

So technically I can change over the differentials to the newer ones from
the automatic and have them work. Foresee any issues I might come
across?

J
Post Reply

Return to “L300 Technical”