Delica Canada | Mitsubishi Van Club

I've been looking so hard for this part "side door bracket and sliding piece" the sliding unit that attaches to the door and the baring device that attaches to the van rail. i need the whole thing. i can't find the part #. I've looked but I'm not good on this site. can anyone give me a lin...

i wanted to come back to this topic because I've put two years of towing on my Delica now and have learned a lot. i tow a Boler trailer in the summer and fall and a utility trailer with a snowmobile on it in the winter. boler - 1100 lbs dry snowmobile - 800-900 lbs with gas and extra tire. what i do...

The alignment bumpers is the door jam need to be checked for proper position. The lock mechanism inside the door can get dirty and the interlock mechanism won't move all the way to properly engage the main catch...or pin. If the hatch door has dropped a little due to hinge bolt tightness/alignment ...

Thanks so much lrp374, big-bird and wobbly. lrp374, that was a great reply!!! it really shows everything/every step well and with a diagram and photos (CHECK IT OUT EVERYONE). i have most of it done already because my van came with a half broken-down version. but its finally crapped the bed so its t...

does anyone have the fabrication file, PDF or documents to build this unit for an L300 (94") Sliding door extension bracket. i have the oversized fenders and am having serious problems finding this info anywhere.
thank you to anyone who can help.

Andrew (Banff Aberta)

How hard is this latch mechanism to disassemble and reassemble? I'm running into the same problem and with a lot of fixes like this, I can usually never get the part back together i have had the same issue. i can't find whats keeping it from closing or the latch engaging at all. i can hear the auto...

i have recently changed over to 10W30 diesel oil in my L300 Delica and found fantastic results. i live in Alberta so our winters are brutally cold and my van is turning over a bit better in the morning now with the 10W. also, i'm not a specialist; but i found my engine is staying cooler. i cant back...

this is a great hitch. i have been towing all winter with it and havnt had any issues.

[quote="dennis_lambert"]"The K&N filter listed in WIKI that should fit is a E-4810" A provided link seems to show the E-4810 filter is only good on 87 and 88 L300 ? Did Mitsusbishi change the filter can for later years? Mines a 94....... K&N Applications for E-4810 Replac...

thanks guys, ill try your suggestions.

lately my van's exhaust has been smoking more than usual. any ideas why? or how to minimize this? is it normal to always billow out black smoke when accelerating? i drive a 1994 L300 turbo Diesel. thanks!

i found this on a trailer web site. it may help with making your own. some good supplies here.
http://www.vintagetrailersupply.com/Curtain_s/65.htm

these are great hitches. i just ordered one in December and have been using it since. i was just 4X4 ing on a sled road and got stuck pretty bad. used the hitch bar to rig my ratchet/tow rope to a tree and pulled it out. no movement at all on the hitch mounts. you also have options on how far the mo...

anyone know what these vans are capable of? i know 80-85% of vehicle weight is normally max load. how much do the L300 delica's weigh? i want to tow a camper/trailer and need to find out what it will handle. suggestions are welcome! thanks for your help

i just purchased one of these hitches and its great!!! affordable and mounts really easy. i have been towing a utility trailer and snowmobile. no problems at all.